StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

Physical properties of transparent optical polymers - Dissertation Example

Cite this document
Summary
Chapter 5 Physical Properties of Transparent Optical Polymers 5.1. Introduction Owing to their optical properties, many transparent polymeric materials have found widespread use in a variety of optical applications. Transparent polymeric plastics such as polymethylmethacrylate (PMMA) and polycarbonate (PC) have replaced glass in several applications including optical focusing mechanisms (Optical Polymers International, 2010)…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER96.3% of users find it useful
Physical properties of transparent optical polymers
Read Text Preview

Extract of sample "Physical properties of transparent optical polymers"

Download file to see previous pages

substituted ethylenic) copolymer (Weber, 2003). Structural units of most of these polymers are given in the figure 5.2. Fig. 5.2: Structural units of common optical polymers (Martienssen and Warlimont, 2006). Because of the variations in structure, the properties such as refractive index, thermal stability, etc. vary among the different polymers (Losch et al., 1992). The properties of certain optical polymers (PC, PMMA, and ADC in comparison to glass are shown in figure 5.3. Fig. 5.3: Comparison of physical properties of glass and optical polymeric plastics – PC, PMMA and ADC (Optical Polymers International, 2010).

This chapter describes and compares the physical properties of common optical polymers. The following physical properties will be discussed further: 1. . The scattering loss of these materials is low and their refractive indices are controllable (Jones, 1997). This allows their fabrication into waveguide structures. 5.2.1. Comparison of Refractive Index The refractive index of most transparent polymeric materials is around 1.5. As these are carbon based, their refractive indices and dispersion are very different from crystals and glasses (Weber, 2003).

Polyetherimide (PEI) has a refractive index higher than most other optical polymers. Other polymers with high refractive indices include polyarylsulfone, polyarylate, PC, and PS. PMMA has a refractive index of 1.491. The refractive indices of some common polymers are shown in table 5.1. The refractive index of ADC is 1.50, which compares well with that of glass. Polymer Refractive index PEI 1.658 Polyarylsulfone 1.651 Polyarylate 1.61 PS 1.590 PC 1.586 SAN 1.579 CR-39 1.504 PMMA 1.491 TPX 1.466 Table 5.

1: Refractive indices of common polymeric materials. The refractive index of a polymer is influenced by the polarizability, free volume and the difference between the maximum absorption wavelength and optical wavelength of the material (Ma et al., 2002). The higher the density and the polarizability of the material, the higher will be its refractive index. Various other polymeric materials have been used in optical focusing mechanisms. These include polyimides (PI), fluoropolymers (FP) such as Tedlar® PVF, Tefzel® ETFE, and Teflon® FEP, and hydrocarbon polymers (HCP) like polyvinylbutyral (PVB).

Among the fluoropolymers, the lowest index of refraction is that of Teflon FEP, which is completely fluorinated (French et al., 2011). It is observed that as the amount of

...Download file to see next pages Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Physical properties of transparent optical polymers Dissertation”, n.d.)
Physical properties of transparent optical polymers Dissertation. Retrieved from https://studentshare.org/physics/1403521-chapter
(Physical Properties of Transparent Optical Polymers Dissertation)
Physical Properties of Transparent Optical Polymers Dissertation. https://studentshare.org/physics/1403521-chapter.
“Physical Properties of Transparent Optical Polymers Dissertation”, n.d. https://studentshare.org/physics/1403521-chapter.
  • Cited: 0 times

CHECK THESE SAMPLES OF Physical properties of transparent optical polymers

Zemax EE Software and Programming

optical design parameters are modeled based on the data obtained to achieve optimum collection of solar radiation.... Therefore, this chapter details the basics of Zemax software for optical design and ray tracing.... Software programs for lens design and optical studies have been of immense utility in the field of optics.... Their advent has substantially simplified and enhanced our understanding of optical design and analysis....
11 Pages (2750 words) Dissertation

Thermoplastic Copolyester Nancomposites for Biomedical Applications

Thermoplastic Copolyester Nancomposites for Biomedical Applications Thermoplastic coployester nanocomposites are a relatively new class of materials that leverage the benefits of engineered plastics and the properties of elastomers.... hellip; Nanocomposites are polymers containing particles in the matrix that possess at least one dimension of the dispersed particles in the nanometer range (... The primary objective of the proposed research is two-fold, aiming to both develop an improved thermoplastic copolyester based on thermo copolyester elastomers (TPE-E's) nanocomposite materials and to define the range of material properties for such a material in a manner that will allow the material to be practically assessed for use in a broad range of biomedical device and other applications efficiently....
6 Pages (1500 words) Research Proposal

The physical properties of glass and polymer materials PMC

Name of Student Student's Number The physical properties of Glass and Polymer Materials PMC Course Institution Date Report on the physical properties of Glass and Polymer Materials PMC.... This is done to enhance the physical properties of the material and to acquire an effective product in the manufacturing process.... For example, the thermal properties of polymers and composite structures can be altered through the use of a variety of fillers....
7 Pages (1750 words) Essay

High temperature polymers

properties of composite polymers that are applicable for high temperatures have higher values as compared to other materials.... Jumana khouri Oct3rd/2012 High Temperature polymers Abstract: polymers or most basically known as plastics are found almost anywhere and everywhere.... This paper discusses the special type of polymers -the high temperature polymers, its definition, properties, design, structure, tests and the various applications in the many industries today....
8 Pages (2000 words) Essay

Polymer Organic Light Emitting Diode Materials and Techniques

The study that was conducted is about the one of the most important technology in optics and optical engineering.... This is the light technology that uses semi-conducting diodes referred to as LEDs or light-emitting diodes.... The main focus is one of the types of LEDs which is the polymer organic light-emitting diode (POLED) or the polymer light-emitting diode (PLED). … The objective of the research was achieved through the assimilation of the published reports and developments on the topic covered by the period starting from the year 1998 to the present year....
23 Pages (5750 words) Essay

Polymer Organic Light Emitting Diode Materials and Techniques

hellip; The conducted study is about one of the most important technology in optics and optical engineering.... The study “Polymer Organic Light Emitting Diode Materials and Techniques”  illustrates the importance of the development of the LED technology that is applied in flat- and LCD panel displays and is suggested to be used in experiments with the Small Molecule and the Coagulated Polymer in future....
19 Pages (4750 words) Research Paper

The Mechanism whereby Organic Polymers are Used in Solar Cells

This paper ''The Mechanism whereby Organic polymers are Used in Solar Cells'' tells that a several improvements have been made, leading to exploring new materials for solar cells.... The advancement in the research in this sector has now been able to develop a mechanism whereby organic polymers are used in solar cells.... hellip; In large scale production, they can be produced very fast, and their properties can be easily modified, hence making them suitable for use in a wide range of environments....
31 Pages (7750 words) Report

Materials and Experimental Techniques

(2003) studied the polymer's optical and electrical properties and estimated its HOMO level at 4.... The nature of the materials and the device's required properties determined the choice of the process used in the book.... The second part outlines the equipment used for studying the electrical properties and morphology of organic solar cell devices.... P3HT has favourable processing properties in solution because good films can easily be manufactured through casting, spin coating, or printing at low temperatures ...
16 Pages (4000 words) Report
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us